2 Wire Fire Detectors

The Multipoint and ASD detectors have set new standards in detector technology. The TWINFLEX Multipoint head is a 2-wire device used with the TWIN...

Using the ASD Multipoint detector with sounder and/or strobe as part of the TWINFLEXpro 2-wire fire alarm system means that when a detector is wir...

Using the ASD Multipoint detector with sounder and/or strobe as part of the TWINFLEXpro 2-wire fire alarm system means that when a detector is wir...

The Twinflex Manual Call Point allows for user activation of the fire alarm system. Once operated the device latches into the alarm position and r...

The 25-0083-303 is a cover flap that can be fitted to Fike's manual call point range in order to reduce the risk of accidental operation. Features...

The 45-0022 comes in a pack of 5 and is suitable for the Fike Twinflex Callpoints.

The AlarmSense Optical Smoke Detector works using the light scatter principle. The detector changes to alarm state at a pre-set threshold of smoke...

The AlarmSense Heat Detector (A1R) has a fixed upper limit, but in addition, measures the rate of increase in temperature. Features: Can be used...

An AlarmSense detectors can only be mounted into the AlarmSense Base. The base is used for installing detectors that do not require an integral so...

The base can only be used with AlarmSense systems. It is fitted with electronic circuitry to monitor the presence of detectors and signals any una...

The base is designed to be used with AlarmSense systems only. It is supplied with a low or high volume setting and red or white caps are available...

The Manual Call Point is used to manually initiate an alarm signal on the fire detection system. Features: EN 54-11 Certified 'Plug and Play' te...

The Manual Call Point has been designed to operate on an AlarmSense two-wire loop. An alarm is initiated by pressing the resettable element, which...