Products

An AlarmSense detectors can only be mounted into the AlarmSense Base. The base is used for installing detectors that do not require an integral so...

  The Manual Call Point has been designed to operate on an AlarmSense two-wire loop. An alarm is initiated by pressing the resettable element, whic...

  The Apollo AlarmSense Open Area Sounder in red is designed to provide a clear and powerful audible alarm across large or open spaces. It forms pa...

The AlarmSense Open-Area Sounder VID is designed for use in open-areas. Features: Synchronised flashing red LED on sounder visual indicators and...

The base can only be used with AlarmSense systems. It is fitted with electronic circuitry to monitor the presence of detectors and signals any una...

The base is designed to be used with AlarmSense systems only. It is supplied with a low or high volume setting and red or white caps are available...

The AlarmSense Heat Detector (A1R) has a fixed upper limit, but in addition, measures the rate of increase in temperature. Features: Can be used...

The AlarmSense Optical Smoke Detector works using the light scatter principle. The detector changes to alarm state at a pre-set threshold of smoke...

The Manual Call Point is used to manually initiate an alarm signal on the fire detection system.  Feature: EN 54-11 Certified Resettable operatin...

The Discovery Heat Detector features a low air flow resistance case and a single thermistor to sense the air temperature around the detector. Featu...

  The Discovery Optical Smoke Detector are high-specification devices using the light scatter principle to quickly detect fire while effectively ma...

The Intelligent Mains Switching Input/Output Unit provides a single line tolerant circuit (CoreProtocol only) containing one or more normally open...

The Apollo 39213-015APO Detector Dust Cap Cover is designed to prevent dust contamination in Apollo detectors during building works or renovations....

The Apollo 39213-015APO Detector Dust Cap Cover is designed to prevent dust contamination in Apollo detectors during building works or renovations....

  The Series 65 Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external ...

The base is designed for use with conventional systems that have manual call points and detector bases on the same circuit. The base is fitted wit...

The Series 65 Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external ai...

The Series 65 Optical Smoke Detector uses light sensing technology to “see” smoke entering the chamber. The external detector moulding is identica...

The Series 65 Heat Detector uses a dual thermistor network to monitor temperature.  Features: Can be used for applications where smoke detectors ...

The XP95 Heat Detector (A2S) monitors temperature by using a single thermistor which provides a count output proportional to the external air tempe...

XP95 Sounder Base - Ancillary with mounting base. Designed for indoor use.  Features: Two Apollo Tones EN54-3 Sounder Multiple Selectable Volumes...

The Sounder Visual Indicator Base is a loop-powered sounder and visual indicator combined with a standard Intelligent Mounting Base. It is used to...

The Apollo XP95 Visual Indicator Base with red flash is designed to provide a clear visual alarm signal as part of an addressable fire alarm system...

The XP95 Manual Call Point is used to manually initiate an alarm signal on the fire detection system. Features: EN 54-11 & EN 54-17 Certifie...